We are there for you!

 

Wherever you are in the world, whichever location your purchasing, production, or R&D departments call home, you can count on us to provide expert consulting. You can either meet with our local sales partners in your region or have a video consultation with our headquarters in Hamburg.

 

This is what we stand for:

 

We are committed to treating people of all cultures respectfully and as partners. Furthermore, sustainable usage of renewable raw materials is part of our DNA, and “responsible care” is actively put into practice.

 

120 Years of Reliability

 

Our basic principle: We always look toward the future. We conduct research for your products of tomorrow. We take care today to ensure dependable partnerships and benefit from the experience we have gained over the last 120 years, which is a particular source of pride for us.

 

Here is the latest…

 

In our news section, we continually report on the latest new from DOG and what is important to us and to our customers. Each click is worth it!

 

Processing Additives

The selection of the most effective processing agent depends on the types of rubber to be processed, the production methods and parameters, and the specific requirements of the end products. DOG-Chemie has developed a wide range of highly specialized products in its own development laboratories and in the application technology center at its Hamburg site. Our application engineers will be pleased to advise you.

PROCESSING ADDITIVES

Deoflow 821

Pentaerythritol tetrastearate

  • Lubricating and demoulding agent
  • Higher temperature stability, therefore also particularly suitable for NBR, HNBR and ACM
  • Versatile areas of application
  • Low dropping point
Dropping Point (°C) Ash (%) Dosage (phr)
65 < 0,2 1 - 3
product Information inquiry

Deoflow A

Zinc free Processing Additives

  • Universally used, since no side effects for the vulcanization system
  • Optimized dispersion and flow behavior
  • Free from metal ions and therefore also suitable for elastomers, which containing halogens
Dropping Point (°C) Ash (%) Dosage (phr)
96 < 1,0 2 - 6
product Information inquiry

Deoflow AM

Zinc free Processing Additives

  • Universally used, since no side effects for the vulcanization system
  • Optimized dispersion and flow behavior
  • Free from metal ions and therefore also suitable for elastoms, which containing halogens
Dropping Point (°C) Ash (%) Dosage (phr)
97 < 0,3 2 - 6
product Information inquiry

Deoflow AP

Fatty acid ester combined with lubricants

  • Universally used, since no side effects for the vulcanization system
  • Optimized dispersion and flow behavior
  • Free from metal ions and therefore also suitable for elastomers containing halogens
Dropping Point (°C) Ash (%) Dosage (phr)
102 < 0,5 2 - 6
product Information inquiry

Deoflow D

Fatty alcohol and fatty acid ester with inorganic dispersion agent

  • Economic product
  • Optimized dispersion and flow behavior
Dropping Point (°C) Ash (%) Dosage (phr)
97 20,5 2 - 6
product Information inquiry

Deoflow F

Zinc free Processing Additives

  • Zinc-free
  • Universally applicable
  • Optimises dispersion and flow behaviour
  • Improves release behaviour
  • Improves the homogeneity of the mixture
  • Anhydrous
Dropping Point (°C) Ash (%) Dosage (phr)
88,0 ± 2,0 6,4 2 - 5
product Information inquiry

Deoflow S

Calcium salt of saturated fatty acids combined with amide esters

  • Excellent lubricating and dispersion agent
  • Improves demoulding and release behavior
  • Versatile areas of application
Dropping Point (°C) Ash (%) Dosage (phr)
105 4,5 1 - 5
product Information inquiry

Deoflow Z

Calcium salt with amide ester and inorganic dispersant

  • Economical product
  • Lubricating and dispersing agent
  • Improves demoulding and release behavior
Dropping Point (°C) Ash (%) Dosage (phr)
103 24,5 2 - 6
product Information inquiry

Deogum 194

Organosiloxane combined with lubricants

  • Improved release and demoulding behaviour
  • No impeding influence of the organosiloxane on following processes
  • Low peroxide consumption
  • Also suitable for special elastomers such as HNBR, ACM, ECO, etc.
Dropping Point (°C) Dosage (phr)
100 0,5 -3
product Information inquiry

Deogum 194

Organosiloxane combined with lubricants

  • Improved release and demoulding behaviour
  • No impeding influence of the organosiloxane on following processes
  • Low peroxide consumption
  • Also suitable for special elastomers such as HNBR, ACM, ECO, etc.
Dropping Point (°C) Dosage (phr)
100 0,5 - 3
product Information inquiry

Deogum 294

Organosiloxane combined with lubricants

  • Primarily used for FKM
  • Improved release and flow behavior
  • No impeding influence of the organosiloxane on following processes
Dropping Point (°C) Dosage (phr)
104 0,5 - 3
product Information inquiry

Deogum 294

Organosiloxane combined with lubricants

  • Primarily used for FKM
  • Improved release and flow behavior
  • No impeding influence of the organosiloxane on following processes
Dropping Point (°C) Dosage (phr)
104 0,5 - 3
product Information inquiry

Deogum 384

Phosphoric acid ester combined with organosiloxane

  • Primarily for AEM and HT-ACM
  • Reduces tackiness
  • Optimizes dispersion and flow behaviour
Dropping Point (°C) Dosage (phr)
104 0,5 - 5
product Information inquiry

Deogum 400

Combination of fatty acid derivates and waxes

  • Primarily used for FKM
  • Improved demoulding and mould fouling behavior, particularly when curing with peroxides
  • Improves dispersion and flow behaviour
Dropping Point (°C) Dosage (phr)
104 0,5 - 3
product Information inquiry

Deogum 80

Combination of fatty acid derivatives and lubricants

  • Applicable for a broad range of elastomers 
  • Improved demoulding and reduced mould fouling in peroxide cured EPDM compounds
Dropping Point (°C) Ash (%) Dosage (phr)
112 3 1 - 5
product Information inquiry

Deoplast EP 11

Combination of zinc soap and fatty acid amide

  • The composition of metal soap and amide optimizes compatiblization (phase transfer) and flow characteristic
  • Improved demoulding and release
  • Reduces viscosity
Dropping Point (°C) Ash (%) Dosage (phr)
110 6 2 - 5
product Information inquiry

Deoplast EP 12

Complex mixture of metal soap and fatty acid amides

  • Improves demoulding and release behaviour
  • Optimized dispersion and flow behaviour
  • Primarily for EPDM and EVA
  • With antistatic properties
Dropping Point (°C) Ash (%) Dosage (phr)
120 3 2 - 5
product Information inquiry

Deoplast EP 20

Fatty acid derivative free from metal ions

  • Low dropping point
  • Improved demoulding and release
  • Optimized dispersion and flow behavior
  • Free from metal ions and therefore suitable for elastomers containing halogens – i.e. CR
Dropping Point (°C) Ash (%) Dosage (phr)
80 < 0,2 1 - 5
product Information inquiry

Deosol HN

Fatty acid ester combined with waxes and inorganic dispersant

  • Versatile areas of application
  • Dispersing aid, particularly for reinforcing fillers
  • Low peroxide consumption
  • Low dropping point
Dropping Point (°C) Ash (%) Dosage (phr)
55 21,5 2 - 10
product Information inquiry

Dispergum 24

Combiation of zinc soaps of specific fatty acids and oxidation catalyst

  • Mild peptizer with a positive influence on dynamic properties such as heat build-up
  • Suitable for light compounds
  • Combines the properties of a peptizer and a processing additive
  • No hazardous good, because PCTP- and DBD-free
Dropping Point (°C) Ash (%) Dosage (phr)
113 11,8 1 - 3
product Information inquiry

Dispergum 36

Highly active oxidation catalyst in a matrix of organic and inorganic dispersants

  • Highly efficient at low dosages
  • Low dropping point
  • Fast dispersion
  • No hazardous good, because PCTP- and DBD-free
Dropping Point (°C) Ash (%) Dosage (phr)
63 21,5 0,1 - 1,0
product Information inquiry

Dispergum 40

Highly active oxidation catalyst on a polymer carrier system

  • Highly efficient at low dosages
  • Zinc-free
  • No hazardous good, because PCTP- and DBD-free
Dropping Point (°C) Ash (%) Dosage (phr)
93 20 0,1 - 1,0
product Information inquiry

Dispergum E

Pure zinc soap based predominantly on unsaturated fatty acids

  • Low dropping point, therefore particularly suitable for one step and open mill mixing
  • Improves filler dispersion
  • BfR / FDA suitable
Dropping Point (°C) Ash (%) Dosage (phr)
83 13 2 - 5
product Information inquiry

Dispergum GT

Special combination of zinc soap and fatty acid ester

  • Particularly improves the dispersion of silica respectively highly reinforcing fillers
  • Optimizes dynamic properties such as hysteresis
  • Reduces viscosity
Dropping Point (°C) Ash (%) Dosage (phr)
100 16,5 3 - 5
product Information inquiry

Dispergum K

Zinc soap combined with an inorganic dispersion agent

  • Reduces viscosity / better flow behavior
  • Improves filler dispersion
  • Economical product
  • BfR / FDA suitable
Dropping Point (°C) Ash (%) Dosage (phr)
101 24,5 2 - 5
product Information inquiry

Dispergum PT

Pure zinc soap on the basis of unsaturated and saturated fatty acids

  • Reduces viscosity / better flow behavior
  • Improves filler dispersion
  • Positive influence on heat build-up
  • BfR / FDA suitable
Dropping Point (°C) Ash (%) Dosage (phr)
100 13 2 - 5
product Information inquiry

Dispergum R

Zinc soap combined with a special paraffinic lubricant

  • Reduces viscosity / better flow behavior
  • Improved release behavior
  • Improves filler dispersion
  • FDA suitable
Dropping Point (°C) Ash (%) Dosage (phr)
97 10,2 2 - 5
product Information inquiry

Dispergum ZK

Special combination of zinc and potassium soaps

  • Particularly effective for compounds with light fillers (such as silica or kaolin)
  • Improves filler dispersion and reduces reagglomeration
  • Improves flow behavior
  • BfR / FDA suitable
Dropping Point (°C) Ash (%) Dosage (phr)
95 13,5 3 - 5
product Information inquiry
You are looking for something specific

Our product finder will help you

Enter the product name or product group here. The search results will be displayed in the ranking of the highest match. If you do not get a result, please ask by mail.

We look forward to you

Get in contact

If the content of our website has raised your interest, you are only one click away from us via the buttons below. If you are looking for a new professional home, we will inform you on this page.