We are there for you!

 

Wherever you are in the world, whichever location your purchasing, production, or R&D departments call home, you can count on us to provide expert consulting. You can either meet with our local sales partners in your region or have a video consultation with our headquarters in Hamburg.

 

This is what we stand for:

 

We are committed to treating people of all cultures respectfully and as partners. Furthermore, sustainable usage of renewable raw materials is part of our DNA, and “responsible care” is actively put into practice.

 

120 Years of Reliability

 

Our basic principle: We always look toward the future. We conduct research for your products of tomorrow. We take care today to ensure dependable partnerships and benefit from the experience we have gained over the last 120 years, which is a particular source of pride for us.

 

Here is the latest…

 

In our news section, we continually report on the latest new from DOG and what is important to us and to our customers. Each click is worth it!

 

EP-Additive

EP additives (Extreme Pressure), due to their chemical structure, prevent direct contact between tool and workpiece and so prevent damage to the workpiece through reaction with the metal surface. At the same time, EP additives reduce friction at the contact points and thus enable a higher load-bearing capacity.

In metalworking, the light and semi-dark, low-odor DeoAdd additives are preferred in order to minimize stress on machine personnel. These DOG EP additives are produced using hydrogen sulfide and elemental sulfur. Compared to the commonly known dark sulfur carriers, the light colored DeoAdd products exhibit increased oxidation stability as well as improved solubility in high paraffin base oils.

EP-ADDITIVE

DeoAdd 1215

  • Low-odour variety
  • Better hydrolytic and thermal stability than standard varieties
  • Very good compatibility with non-ferrous metals
Kin. Viscosity at 40 °C [mm²/s] Copper Corrosion Total sulfur content (%)
500 - 550 max. 1 b 14,5 - 15,5
product Information inquiry

DeoAdd 1216

  • Lower viscosity than 1215
  • Low-odour, good thermal and hydrolytic stability
  • Very good compatibility with non-ferrous metals
Kin. Viscosity at 40 °C [mm²/s] Copper Corrosion Total sulfur content (%)
300 - 500 max. 1 b 14,5 - 15,5
product Information inquiry

DeoAdd 1220

  • Semi-dark product
  • For water-miscible and non-water-miscible systems
  • Enhanced performance in combination with fatty oils and/or metal-free additives containing phosphorus
Kin. Viscosity at 40 °C [mm²/s] Copper Corrosion Total sulfur content (%)
15 - 35 max. 1 b 18 - 22
product Information inquiry

DeoAdd 1226

  • High sulphur content combined with high viscosity
  • Excellent EP properties and lubricating properties
Kin. Viscosity at 40 °C [mm²/s] Copper Corrosion Total sulfur content (%)
600 - 1000 4 25 - 30
product Information inquiry

DeoAdd 1230

  • Lowest viscosity, high sulphur content
  • EP booster for metal processing fluids
  • EP additive for a wide variety of applications
Kin. Viscosity at 40 °C [mm²/s] Copper Corrosion Total sulfur content (%)
10 - 30 4 28,5 - 30,5
product Information inquiry

DeoAdd 1411

  • Product based on lard oil
  • Especially for applications that require a high level of lubrication
Kin. Viscosity at 40 °C [mm²/s] Copper Corrosion Total sulfur content (%)
800 - 14000 max. 1 b 10 - 12,5
product Information inquiry

DeoAdd 1415

  • Product based on lard oil
  • Higher sulphur content for enhanced lubrication performance
Kin. Viscosity at 40 °C [mm²/s] Copper Corrosion Total sulfur content (%)
400 - 800 max. 4 b 14 - 16
product Information inquiry

DeoAdd M 10

  • Grade with lowest sulphur content
  • Can be used as friction modifier
  • Designed for high-temperature applications like slideway oils, gear oils and greases
Kin. Viscosity at 40 °C [mm²/s] Copper Corrosion Total sulfur content (%)
20 - 30 max. 1 b 9 - 11
product Information inquiry

DeoAdd M 16

  • Provides sulphur even at low temperatures
  • For low-viscosity base fluids such as honing oil and grinding oil, as well as deep-hole drilling
  • Recommended for non-ferrous metals such as copper and aluminium alloys
Kin. Viscosity at 40 °C [mm²/s] Copper Corrosion Total sulfur content (%)
30 - 50 max. 1 b 15 - 17
product Information inquiry

DeoAdd M 18

  • Provides sulphur even at low temperatures
  • For low-viscosity base fluids such as honing oil and grinding oil, as well as deep-hole drilling
  • Recommended for non-ferrous metals such as copper and aluminium alloys
Kin. Viscosity at 40 °C [mm²/s] Copper Corrosion Total sulfur content (%)
45 - 55 max. 1 b 17 - 18
product Information inquiry

DeoAdd MD 18

  • Comparable to M 18, but darker in colour
  • For applications where costs should be optimized
Kin. Viscosity at 40 °C [mm²/s] Copper Corrosion Total sulfur content (%)
45-60 max. 1 b 17 - 18
product Information inquiry

DeoAdd MDX 18

  • Sulphur carrier without additives
  • Darker colour than MX 18
Kin. Viscosity at 40 °C [mm²/s] Copper Corrosion Total sulfur content (%)
45 - 60 4 17 - 18
product Information inquiry

DeoAdd MDZ 18

  • Can be used when an elevated level of ZDDP compatibility is required
  • Extreme pressure properties similar to M 18 and MD 18
Kin. Viscosity at 40 °C [mm²/s] Copper Corrosion Total sulfur content (%)
45 - 60 max. 3 b 17 - 18
product Information inquiry

DeoAdd MOZ 16

  • Can be used when an elevated level of ZDDP compatibility is required
  • Extreme pressure (EP) properties like M 16
Kin. Viscosity at 40 °C [mm²/s] Copper Corrosion Total sulfur content (%)
30 - 50 max. 3 b 15 - 17
product Information inquiry

DeoAdd MR 16

  • Outstanding EP/AW properties in combination with ash-free dithiophosphates
  • When combined with M 10, MD 10 and/or 1226/1230, the temperature range can be expanded, and the lubricating effect can be enhanced
Kin. Viscosity at 40 °C [mm²/s] Copper Corrosion Total sulfur content (%)
250 - 280 max. 1 b 15,5 - 16,5
product Information inquiry

DeoAdd MRD 10

  • Grade with the lowest sulphur content
  • Can be used as a friction modifier
  • Higher performance lubrication due to special triglycerides
  • Advantageous for tension-free processes involving non-ferrous metals
Kin. Viscosity at 40 °C [mm²/s] Copper Corrosion Total sulfur content (%)
240 - 280 max. 1 b 9 - 11
product Information inquiry

DeoAdd MRD 16

  • Biodegradable
  • Very good compatibility with non-ferrous metals
  • Doses of up to 40% possible for reforming processes
Kin. Viscosity at 40 °C [mm²/s] Copper Corrosion Total sulfur content (%)
240 - 280 max. 1 b 15,5 - 16,5
product Information inquiry

DeoAdd MRD 18

  • Semi-dark EP additive with neutral odour
  • Excellent EP/AW properties in combination with the appropriate antiwear additives
Kin. Viscosity at 40 °C [mm²/s] Copper Corrosion Total sulfur content (%)
240 - 280 4 17 - 18
product Information inquiry

DeoAdd MRX 16

  • Type without additives
  • Formulation with Deophos products leads to enhanced performance
Kin. Viscosity at 40 °C [mm²/s] Copper Corrosion Total sulfur content (%)
250 - 280 4 15,5 - 16,5
product Information inquiry

DeoAdd MRZ 16

  • Can be used when an elevated level of ZDDP compatibility is required
  • Extreme pressure (EP) properties similar to MR 16 and MRD 16
Kin. Viscosity at 40 °C [mm²/s] Copper Corrosion Total sulfur content (%)
240 - 280 max. 3 b 15,5 - 16,5
product Information inquiry

DeoAdd MX 18

  • Sulphur carrier without additives
Kin. Viscosity at 40 °C [mm²/s] Copper Corrosion Total sulfur content (%)
45 - 55 4 17 - 18
product Information inquiry
You are looking for something specific

Our product finder will help you

Enter the product name or product group here. The search results will be displayed in the ranking of the highest match. If you do not get a result, please ask by mail.

We look forward to you

Get in contact

If the content of our website has raised your interest, you are only one click away from us via the buttons below. If you are looking for a new professional home, we will inform you on this page.